COVID-19 Support


covidbanner.png

If you would like to use your Markforged printer to help remedy the equipment shortage in the fight against COVID-19, Eiger now has a built-in page to help you do so. Click the banner pictured above (or navigate to My Profile and enable the Include COVID-19 tab in library toggle switch) to display the COVID-19 Support tab in the sidebar. 

 

The COVID-19 Support page serves as a repository of public builds designed to be printed on Markforged printers. This page can be hidden or displayed at will by toggling the switch in the COVID Library section of the My Profile page; for more information, see My Profile. The note at the top of the page contains links where you can: 

Ensure that you read the project introduction and build instruction documents before printing these builds.

 
The repository currently has three sections: Desktop Builds, Industrial Builds, and X7 Turbo Builds.
 

covid_desktopbuilds.png

The Desktop Builds section contains builds that can be printed on a Markforged Desktop Series printer. The Desktop 1x Brim build can be printed on the Onyx One, Onyx Pro, and Mark Two, but the Desktop 1x Liner and Desktop 5x Liner builds can only be printed on the Mark Two. For more information on printing these builds, see the build instruction document linked at the top of the COVID-19 Support page in Eiger.

 

covid_industrialbuilds.png

The Industrial Builds section contains builds that can be printed on a Markforged Industrial Series printer. The Indust. 1x Brim and Indust. 5x Brim builds can be printed on the X3, X5, and X7, but the Indust. 1x Liner and Indust. 5x Liner builds can only be printed on the X7. For more information on printing these builds, see the build instruction document linked at the top of the COVID-19 Support page in Eiger.

 

covid_x7turbobuilds.png

The X7 Turbo Builds section contains builds that can only be printed on an X7 printer with Turbo Print enabled. The Turbo 1x Brim and Turbo 5x Brim builds, which are designed to print over twice as fast as the Indust. 1x Brim and Indust. 5x Brim builds pictured above, can be printed on any compatible X7. For more information on printing these builds, see the build instruction document linked at the top of the COVID-19 Support page in Eiger.