Fiber Feed Tube Replacement


Topics:


Supplies:

  • 2mm hex key
  • Replacement fiber feed tube

 

Remove Fiber Feed Tube

  1. Unload fiber material. For more information, see Unload Fiber.
  2. Use a 2mm hex key to loosen, but not remove, the top right socket head cap screw on the fiber extruder.
  3. Detach the fiber feed tube from the fiber extruder.
  4. Pass the fiber feed tube through the channel behind the rail at the back of the printer.
  5. Discard the fiber feed tube.

Replace Fiber Feed Tube

  1. Pass the new fiber feed tube up through the channel behind the rail at the back of the printer.
  2. Insert the fiber feed tube into the slot on the right side of the fiber extruder.
  3. Use the 2mm hex key to tighten the top right socket head cap screw on the fiber extruder until it secures the fiber feed tube.
  4. Reload fiber material. For more information, see Load Fiber.