Debug Mode


To aid in troubleshooting, Markforged printers are equipped with a Debug Mode. A printer in Debug Mode generates verbose logs of all firmware communications for sharing with our Support team.

A printer in Debug Mode will remain so even after a power cycle, failed print, or print pause. It will revert to normal operation after a print is completed successfully.

It is not necessary to activate Debug Mode unless instructed to do so by Markforged Support.

Enabling Debug Mode

To enable Debug Mode, navigate to Menu > Settings > Debug Mode on your printer's touchscreen, then toggle the slider to the Debug Mode position.

debug_mode_1.png   Screen_Shot_2019-05-30_at_1.36.33_PM.png