Calibrate Stepper Motor Encoders


Topics:

 

Calibrate Stepper Motor Encoders

  1. Select the menu icon from the dashboard.


     
  2. Select the Utilities tile from the available options.


     
  3. Select the Maintenance tile from the available options.

    mceclip0.png
     
  4. Select the Calibrate Encoders tile.

    calibrateencoders.png
     
  5. Press Unload Plastic on your printer’s touchscreen, then follow the onscreen instructions to unload plastic material from the printer. When you are finished unloading material, proceed to the next step.


     
  6. Manually move the print head to the center of the print chamber and press Next on the printer’s touchscreen.

    mceclip2.png
     
  7. Allow the stepper motors to calibrate, then press Done on the printer's touchscreen.


     
  8. Reload plastic material. For more information, see Load Plastic.

Back To Top