Unload Fiber



  • Tape (if there is none adhered to the side of the fiber spool)


Unload Fiber

  1. Select the menu icon from the dashboard. 

  2. Select the Materials tile from the menu options.

  3. Select the Unload Fiber tile to run the Unload Fiber routine.

  4. Press Next on the screen to disable the fiber extruder.

  5. Carefully wind the remaining fiber back onto the spool.
  6. Tape the end of the fiber filament to keep it from unspooling and press the Next button on the printer's touchscreen.

  7. Press Load Fiber to load a different spool, or Not Now to exit the routine.

Back To Top