Embedding Components

Note: Legacy documentation is no longer being updated. For up to date instructions, see our Desktop Series support articles.


Electronics and other components can be embedded inside your part.  

  1. Model a cavity for the component (cut extrude a cavity in the solid model)
  2. Insert a pause on the last layer of the cavity (the printer will pause at the end of the layer).  Insert pause in the "Internal View" menu, under 2D editing.
  3. Use the supplied glue stick to glue to top and bottom of the object.
  4. Ensure the object is below the print nozzle, when placed in the cavity, or the print nozzle may be damaged (collide with your part)