Print Visor Replacement




Removing the Print Visor

To remove the print visor:

  1. Use a 4mm allen wrench to loosen the bolt at each connection point of the visor.

  2. Remove the bolt and washers from the printer and set aside.
  3. Remove the caps from the outside of the visor and set them aside.
  4. Remove and set aside all other connection parts.

  5. Gently remove the visor from the printer.

Before starting a print, you should be sure to reinstall or replace your visor. For more information, see the section below.

Back To Top


Replacing the Print Visor

To replace the print visor on your printer:

  1. If the caps are still on your visor, please remove them.
  2. Slide the visor onto the printer so that the circular slots on both the visor and the printer line up.
  3. Slide the spacers with the slots on the printer frame.
  4. Insert and align all other connection parts.

  5. Reattach the visor caps on each side.
  6. Use a 4mm allen wrench to fasten the bolts at each connection point on the visor.

Back To Top