Victoria Board Replacement


Goals:

  1. Remove Victoria Board
  2. Replace Victoria Board

 

 

Removing the Victoria Board

To remove the Victoria Board from your printer:

  1. Shut off your printer, remove the print bed, and unplug the power supply from the back panel.
  2. Place the printer upside down on a flat, stable surface.
  3. Remove the ten screws that attach the bottom plate to the printer and set them aside.



  4. Remove the bottom plate from the printer and set it aside.
  5. Unplug all connections from the Victoria Board.



  6. Remove the screws connecting the Victoria Board to the printer and set them aside.



  7. Remove the Victoria Board from your printer.

Back To Top

 

Replacing the Victoria Board

To replace the Victoria Board from your printer:

  1. Place the new Victoria Board in your printer.
  2. Replace the screws that connect the Victoria Board to the printer.



  3. Reconnect the connections to the board.



  4. Replace the bottom plate on the printer.
  5. Replace the ten screws that connect the bottom plate to the printer.



  6. Turn the printer right side up and place it on a flat, stable surface.
  7. Plug the power cord in and turn the printer on. Ensure that it boots completely.

Back To Top