Goals:
Removing the Victoria Board
To remove the Victoria Board from your printer:
- Shut off your printer, remove the print bed, and unplug the power supply from the back panel.
- Place the printer upside down on a flat, stable surface.
- Remove the ten screws that attach the bottom plate to the printer and set them aside.
- Remove the bottom plate from the printer and set it aside.
- Unplug all connections from the Victoria Board.
- Remove the screws connecting the Victoria Board to the printer and set them aside.
- Remove the Victoria Board from your printer.
Replacing the Victoria Board
To replace the Victoria Board from your printer:
- Place the new Victoria Board in your printer.
- Replace the screws that connect the Victoria Board to the printer.
- Reconnect the connections to the board.
- Replace the bottom plate on the printer.
- Replace the ten screws that connect the bottom plate to the printer.
- Turn the printer right side up and place it on a flat, stable surface.
- Plug the power cord in and turn the printer on. Ensure that it boots completely.