Unboxing and Assembly


Goals:

 

 

What's In The Box

Your Mark Two ships with a number of accessories that are listed here. These may be provided in multiple shipments.

  • Dry Box Adaptor Plug
  • 2.5mm Allen Wrench
  • 5 Fiber PTFE Tubes
  • Plastic Shim
  • Fiber Shim
  • Plastic Feed Tube
  • USB A to USB B cable
  • UBS Extension cable
  • Tweezers
  • Glue Stick
  • Antiseize
  • 12.4 in-lbs torque driver
  • Nylon Nozzle torque bit
  • Fiber Nozzle Torque bit
  • 3 Plastic Nozzles
  • 3 Fiber Nozzles
  • Wi-Fi Antenna
  • Scraper
  • 1 TrueBed
  • 1 Onyx spool
  • 50cc Fiberglass
  • Power Cord
  • Spool holder assembly

 

 

Unboxing and Assembly

Please take care when unboxing and assembling your printer.

To unbox and assemble your Mark Two or Onyx Pro:

  1. Remove your printer from the box.
  2. Remove the zip ties that hold the XY Gantry to the Z-stage.
  3. Plug in the Wi-Fi antenna to the SMA jack in back of printer, or plug in the ethernet cable to the ethernet port.
  4. Plug the power cord into a wall outlet and into the printer.
  5. Turn your printer on and wait for it to power up.

Back To Top