Adhesives for Joining Parts


Valid for: 

Composite printers

 

Question:
What adhesives do we recommend for joining Markforged parts?

Answer:
Loctite 401 produces a rigid bond that was found in testing to be stronger than the interlayer adhesion of the nylon. Loctite 4861 is best when a more flexible bond is desired, or if the application requires the glued joint to bend and flex.

Scotchweld DP-series epoxy bonds well to Markforged Onyx; choose DP-100, -200, -300, or -400 based on required bond strength and operating conditions.